Our bromine-free, chlorine-free spa care system only needs your attention a few minutes a week. This system is so easy it's quickly become the most popular with spa owners.
Prepare yourself for a special spa experience with new BioGuard SoftSoak. Our bromine-free, chlorine-free spa care system needs your attention a few minutes a week. SoftSoak provides a wonderfully soft, soothing and gentle spa environment. Expect the best in spa care:
SIMPLE SOFTSOAK START-UP AND MAINTENANCE: Soft, gentle water, no dry skin or hair, non-irritating to eyes, no unpleasant chemical odors and so simple to use.
First Time Start-Up:
1. Fill spa with water.
2. Once spa is filled, start equipment following the manufacturer’s directions.
3. Balance spa water with SpaGuard Total Alkalinity Increaser and Calcium Hardness Increaser. Follow label directions or recommendations from your SpaGuard computerized water analysis.
4. Add the following amounts of SoftSoak products per 150 gallons of spa water (circulating for 30 minutes between each step):
Add 5 ounces of SoftSoak Spa Conditioner
Add 1 ounce of SoftSoak Stain & Scale Control
Add 3 ounces of SoftSoak Spa Shock
Circulate your water continuously for approximately 30 minutes with the blowers off.
5. Add 1 ounce of SoftSoak Sanitizer per 150 gallons of spa water and circulate continuously again for approximately 30 minutes.
6. Using SoftSoak Water Test Strips, check your SoftSoak Sanitizer level and pH. The sanitizer level should be between 30 and 50 ppm and the pH should be within 7.2 to 7.6
Weekly Care:
1. Using SoftSoak Water Test Strips, test the pH, total alkalinity, calcium hardness and sanitizer levels of your spa. Write down the results.
2. Add the following amounts of SoftSoak products per 150 gallons of spa water:
Add 1/4 ounce of SoftSoak Stain & Scale Control
Add between 1 1/2 to 3 ounces of SoftSoak Spa Shock according to spa use rate. If your
spa is used three or more times per week, add 3 ounces per 150 gallons of spa water.
3. The SoftSoak Sanitizer levels should be 30 - 50 ppm. If sanitizer level is 11 - 30 ppm, add
1/2 ounce of SoftSoak Sanitizer per 150 gallons of spa water. If sanitizer level is 0 - 10 ppm, add 1 ounce of SoftSoak Sanitizer per 150 gallons of spa water.
4. If pH is outside 7.2 to 7.5, adjust as needed with Spa Guard pH Increaser or more likely pH Decreaser.
5. Circulate for 30 minutes with the blowers off.
|
SoftSoak Spa Conditioner
Specially formulated for the SoftSoak system! Great product to control and prevent unattractive waterline film around the perimeter of your spa surface. Use this product at every start-up when your spa is drained and refilled.
|
|
|
 |
SoftSoak Sanitizer
Provides effective control of bacteria that can be present in spa water. Test sanitizer level weekly with SoftSoak test strips and add product as needed.
|
|
|
 |
SoftSoak Shock
Oxidizes to remove or break down unwanted compounds introduced into your spa water from body oils and debris. It also improves filtration. SoftSoak Shock is used as part of the maintenance program, depending on spa usage.
|
|
|
 |
SoftSoak Stain & Scale Control
Prevents stains and scale on spa surfaces, and also protects SoftSoak Shock from breaking down due to metals present in source water. It also prevents hard water scale from forming on the spa and spa equipment. SoftSoak Stain & Scale Control is used as part of your weekly maintenance program.
|
|
|
 |
SoftSoak Filter Cleaner
SoftSoak Filter Cleaner is formulated to remove the accumulations that are present on filters in spas that use non-chlorine and non-bromine systems.
|
|
|
